Usage & Cleaning of EGO3 Filters

Getting started

Using our patented filtersystem is very easy:

  • unpack EGO³ Filters and Filterballs
  • open Filtercap - (counterclockwise to the middleposition)
  • ensure that the Opti-Folw strainer is set in with its "feet" to the bottom
  • fill 20pcs of EGO³ Filterballs inside the Filterbody - dont push them too much!
  • close filtercap (clockwise until it right position)
  • screw/stick in your filled EGO³ filter as usual in the filterarea of your spa

 

(please always check compatibility between filter and spa with your local EGO³ dealer)

Cleaning

The EGO³ filterballs are washable and reuseable. Every 6-12 weeks you should perform a cleaning and its done in a trice. Below you find a step by step "intensive" cleaning instruction, but you can also just rinse the filterballs:

 

  • Remove your EGO³ Filter from your spa, let the water inside the filter drain outside the spa.
  • Open Filtercap - (counterclockwise to the middleposition)
  • Empty the filter with the filterballs into a bucket (or washbasin) and squeeze them out like a sponge while you flush them with water.
  • Empty the dirty water out of the bucket and refill it again with fresh water. Let the filterballs soak in there for app. 20min (for intensive cleaning you could add a spoon of chlorine-granulate)
  • After 20min empty the bucket with the dirty water again and give all your EGO³ Filterballs a final flush with fresh water - squeeze them again.
  • Ensure that no filterball is falling apart or get loose before you reuse them. They must stay in shape! Filterballs which lost their shape or are loose have to be exchanged! Dont use reuse them!
  • Clean the EGO³ filterbody just with clear water and towell (dont forget to insert the Opti-Flow strainer again before refilling)
  • fill 20pcs of EGO³ Filterballs inside the Filterbody - dont push them too much!
  • close filtercap (clockwise until it right position)
  • screw/stick in your filled EGO³ filter as usual in the filterarea of your spa

Use EGO³ Filterballs ONLY with the EGO³ Filterbody. Use the EGO³ Filterballs only for the here shown purpose. Only original EGO³ products guarantees you an errorfree operation and best results.